0000... Vehicle test
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2014 BMW Alpina B7L. However, it is still accessible from the selected car via links, so may be relevant.
Connect battery charging computer (see BMW Workshop Equipment Catalogue) to charging terminal in engine compartment.
Connect diagnosis system.
Switch on ignition.
Carry out vehicle identification.
Click on Vehicle test.
The vehicle test is carried out.
NOTE:
For motor vehicle diagnostics, the vehicle test is essential for evaluating possible stored diagnostic trouble codes. In the vehicle test, the control units are physically identified in succession and their fault memories read out.
If the fault memory has been read out, the faults appear in the "Fault pattern selection" mask in the "Fault memory contents" field.
Check identified faults and if necessary rectify these faults after consulting with customer.