51 16 Mirrors, Covers, Ashtrays, Storage Compartments
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - MIRRORS, COVERS, ASHTRAYS, STORAGE COMPARTMENTS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Exterior mirror to front door | F01/F02/F03/F04/F07/F10/F11/F18 | Sheet metal screw | 6 Nm | |
| new rear view mirror, initial screw connection | 8 Nm | ||||
| F25 | thread cutting | 9 Nm | |||
| new rear view mirror, initial screw connection | 11 Nm | ||||
| F12/F13 | thread cutting | 8 Nm | |||
| 2AZ | Sun visor to body | F01/F02/F03/F04/F07/F10/F11/F18/F25 | 2.5 Nm | ||
| 3AZ | Grab handle, front/rear | F01/F02/F03/F04/F07/F10/F11/F18 | 3 Nm | ||
| 4AZ | Support, center console | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18/F25 | 4.5 Nm | ||
| 5AZ | Floor trim panel to support | F01/F02/F03/F04 | 2.5 Nm | ||
| 6AZ | Decorative trim to center console/support | F01/F02/F03/F04/F12/F13 | 1.2 Nm | ||
| 7AZ | Holder, center console, front, middle, to tunnel | F01/F02/F03/F04 | 4.5 Nm | ||
| 8AZ | Centre console to dashboard | F01/F02/F03/F04 | 2.5 Nm | ||
| 9AZ | Decorative trim to center console | F01/F02/F03/F04 | Dia. 5 mm | Oval-head screw for light alloy | 4 Nm |
| F01/F02/F03/F04 | TS5 x 12 | Plastic screw | 2.8 Nm | ||
| 10AZ | Centre console/support to dashboard | F01/F02/F03/F04 | 2.5 Nm | ||
| F12/F13 | 1.2 Nm | ||||
| 11AZ | Cover, rear, with rear compartment nozzle | F01/F02/F03/F04 | 2.5 Nm | ||
| 12AZ | Rear console to body shell holder | F01/F02/F03/F04 | 6 Nm | ||
| 13AZ | Oddments tray, center armrest, to support, center console | F01/F02/F03/F04/F07 | 1.5 Nm | ||
| F12/F13 | 1.2 Nm | ||||
| 14AZ | Handle to inner part, lid, glove box | F01/F02/F03/F04/F25 | 1.5 Nm | ||
| 15AZ | Lid, glove box/end cover to housing | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | 1.5 Nm | ||
| 16AZ | Glove box/storage compartment to dashboard | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18/F25 | 1.8 Nm | ||
| 17AZ | Guide rail, roller sunblind, B-pillar | F01/F02/F03/F04 | Sheet metal screw, black | 2 Nm | |
| F03 | Replace bolts | 2.5 Nm | |||
| 18AZ | Roller sunblind module | F01/F02/F04 | Oval flange head screw (ISA) | 3 Nm | |
| F03 | 8 Nm | ||||
| F07/F10/F11/F18 | 1.5 Nm | ||||
| F25 | 0.7 Nm | ||||
| 19AZ | Engine to function carrier | F01/F02/F04 | Flat-head screw | 4.4 Nm | |
| F03 | 8 Nm | ||||
| 20AZ | Engine to function carrier, top | F01/F02/F04 | Oval-head screw | 2 Nm | |
| F03 | 3 Nm | ||||
| 21AZ | Vent window guide rail - window bar connection | F03 | 4.6 Nm | ||
| 22AZ | Centre console to support | F07 | 1.8 Nm | ||
| 23AZ | Bracket, handle, to bodyshell | F01/F02/F04 | 3 Nm | ||
| 24AZ | Support to holder, support part | F12/F13 | 2.5 Nm | ||
| 25AZ | Side bracket to support | F12/F13 | 1.2 Nm | ||