34 21 Rear Brake
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - REAR BRAKE
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Brake disc to wheel hub | F01, F02, F03, F04, F07, F10, F11, F12, F18, F25 | M8 | Replace screw | 16 Nm |
| 2AZ | Brake anchor plate to wheel carrier | F01, F02, F04, F07, F10, F11, F12, F18 | M12x1.5 | 110 Nm | |
| F03 | M14x1.5 | Replace screws.
IMPORTANT:
Observe 4 phase tightening!
|
|||
| Jointing torque | 150 Nm | ||||
| Release | min.90 ° | ||||
| Jointing torque | 150 Nm | ||||
| Angle of rotation | 180°± 15° | ||||
| F25 | M12x1.5 | Replace screws. | |||
| Jointing torque | 75 Nm | ||||
| Angle of rotation | 45°10° | ||||
| 3AZ | Protective plate to wheel carrier | F01, F02, F03, F04, F07, F10, F11, F12, F18, F25 | M6 | Replace bolts | 12 Nm |
| 4AZ | Guide bolt (brake caliper to brake anchor plate) | F01, F02, F03, F04, F07 | WAF 7 | 30-5 Nm | |
| 5AZ | Guide bolt (brake caliper to brake anchor plate) | F10, F11, F12, F18, F25 | WAF 13 | Replace bolts | 35 Nm |