34 11 Front Brake
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - FRONT BRAKE
| Type | Thread | Tightening specifications | Value | ||
|---|---|---|---|---|---|
| 1AZ | Brake disc to wheel hub | F01, F02, F03, F04, F07, F10, F11, F12, F18, F25 | M8 | Replace screws. | 16 Nm |
| 2AZ | Brake anchor plate to swivel bearing | F01, F02, F04, F07, F10, F11, F12, F18 | M12x1.5 | 110 Nm | |
| F03 | M14x1.5 | Replace screws.
IMPORTANT:
Observe 4 phase tightening!
|
|||
| Jointing torque | 150 Nm | ||||
| Release | min.90 ° | ||||
| Jointing torque | 150 Nm | ||||
| Angle of rotation | 180°± 15° | ||||
| F25 | M12x1.5 | Replace screws. | |||
| Jointing torque | 75 Nm | ||||
| Angle of rotation | 45°10° | ||||
| 3AZ | Protective plate to swivel bearing | F01, F02, F03, F04, F07, F10, F11, F12, F18, F25 | M6 | Replace screws. | 12 Nm |
| 4AZ | Guide bolt (brake caliper to brake anchor plate) | F01, F02, F03, F04, F07, F10, F11, F12, F18, F25 | SW9 | 55 Nm | |
| F10, F11, F12, F18, F25 | SW7 | 30-5 Nm | |||