32 31 Steering Column
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - STEERING COLUMN
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Steering column to dashboard support | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18/F25 | M8 | 21 Nm | |
| 2AZ | Lower steering shaft to hydraulic steering gear/center steering shaft | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | M8 | Recut screw thread. Replace clamping bolt No subsequent buckling permitted! |
28 Nm |
| F25 | M8 | Recut screw thread. Replace clamping bolt No subsequent buckling permitted! |
21 Nm | ||
| 3AZ | Centre steering shaft to steering column/lower steering shaft | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | M8 | Recut screw thread. Replace clamping bolt No subsequent buckling permitted! |
28 Nm |
| F25 | M8 | Recut screw thread. Replace clamping bolt No subsequent buckling permitted! |
21 Nm | ||
| 4AZ | Steering shaft bearing to 2nd bulkhead | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | M6 | 5 Nm | |
| 5AZ | Adjustment lever to steering column | F25 | M8 | 7 Nm | |