31 12 Handlebars and struts
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - HANDLEBARS AND STRUTS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Trailing link to front axle support | F01/F02/F04/F07/F10/F11/F12/F13/F18 | M14 | Replace screw and nut. | |
| Jointing torque | 85 Nm | ||||
| Angle of rotation | 180 ° | ||||
| F03 | M18 | Replace screw and nut. | |||
| Jointing torque | 360 Nm | ||||
| Angle of rotation | 180 ° | ||||
| 2AZ | Trailing link to swivel bearing | F01/F02/F04/F07/F10/F11/F12/F13/F18 | M16 | Replace nut. | |
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| F03 | M18 | Replace nut. | |||
| Jointing torque | 200 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 3AZ | Lower wishbone to front axle support | F01/F02/F04/F07/F10/F11/F12/F13/F18 | M14 | Replace screw and nut. | |
| Jointing torque | 85 Nm | ||||
| Angle of rotation | 180 ° | ||||
| F03 | M18 | Replace screw and nut. | |||
| Jointing torque | 360 Nm | ||||
| Angle of rotation | 180 ° | ||||
| 4AZ | Lower wishbone to swivel bearing/wheel control joint | F01/F02/F04/F07/F10/F11/F12/F13/F18 | M16 | Replace nut. | |
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| F03 | M18 | Replace nut. | |||
| Jointing torque | 200 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 5AZ | Upper wishbone to body | F01/F02/F04/F07/F10/F11/F12/F13/F18 | M10 | Replace nuts. | 54 Nm |
| F03 | M12 | 100 Nm | |||
| 6AZ | Upper wishbone to swivel bearing | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | M10 | Replace nut. | 56 Nm |
| 7AZ | Wishbone to lower damper fork | F01/F02/F04/F07/F10/F11/F12/F13/F18 | M14 | Replace screw and nut. | |
| Jointing torque | 90 Nm | ||||
| Angle of rotation | 180 ° | ||||
| F03 | M18 | Replace screw and nut. | |||
| Jointing torque | 200 Nm | ||||
| Angle of rotation | 180 ° | ||||
| 8AZ | Wheel control joint to swivel bearing | F01/F02/F04/F07/F10/F11/F12/F13 | M30 | Replace nut. | 380 Nm |