24 30 Hydraulic/electric control parts and controlling elements
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - HYDRAULIC/ELECTRIC CONTROL PARTS AND CONTROLLING ELEMENTS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Valve body to transmission | GA6HP19TU/GA6HP26TU | M6 | 8 Nm | |
| 2AZ | Valve housing to valve body | GA6HP19Z/GA6HP26Z/GA6HP32Z | M6 | 5 Nm | |
| 3AZ | Input and output speed sensors to mechatronics | M6 | 12 Nm | ||
| 4AZ | Mechatronics to transmission | GA8HP45Z/GA8HP70Z/GA8HP90Z | M6x59, M6x20 | Replace screws | 8 Nm |
| 5AZ | Oil volume accumulator to transmission | GA8HP45Z / GA8HP50Z / GA8HP70Z / GA8HP75Z | M6x59, M6x20 | Replace screws | 8 Nm |
| 6AZ | Centring plate to transmission bell housing | GA8HP45Z / GA8HP50Z / GA8HP70Z / GA8HP75Z / GA8HP90Z | M8X74 | Jointing torque Angle of rotation |
10 Nm 90° |