LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2510 (Fuel System - Repair - F01/F02) >> 1353 Injection Nozzle And Lines >> 1353170 Removing and installing/replacing all pressure lines (N63) >> Recycling

1353170 Removing and installing/replacing all pressure lines (N63): Recycling

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Fuel escapes when fuel lines are detached.

Catch and dispose of escaping fuel in a suitable container.

Observe country-specific waste-disposal regulations.

NOTE:
  • Ignition coils must not be fouled by fuel!

    The resistance of the silicone material is reduced significantly by contact with fuel, which may cause the ignition coil to fail! Cloths/rags must therefore be used to prevent fuel from getting into the spark plug slots!

  • Before installing ignition coils, clean spark plug slots with compressed air.
  • Make sure the spark plug slot is absolutely clean.