13 62 Senders for Control Unit
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - SENDERS FOR CONTROL UNIT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Temperature sensor, coolant/oil | N63 | M12x1.5 | 13.5 Nm | |
| 2AZ | Pressure sensor to intake manifold | N63 | K50x14 | 3.5 Nm | |
| 3AZ | Camshaft sensor to cylinder head | N63 | M6 | 9 Nm | |
| N63 | K50 | 5 Nm | |||
| 4AZ | Crankshaft sensor to transmission | N63 | M6 | 9 Nm | |
| 5AZ | Knock sensor to crankcase | N63 | M8 | 21.5 Nm | |
| 6AZ | Air-mass meter to upper section of intake filter housing | N63 | K50x16 | 3 Nm | |
| 7AZ | Pressure sensor to intercooler | N63 | M6 | 3.2 Nm | |
| 8AZ | Intake filter housing upper section to intake filter housing lower section | N63 | PT50x26/12 | 3.3 Nm | |
| 9AZ | Clamp to air duct | N63 | 3 Nm | ||