13 51 Injection pump, control
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - INJECTION PUMP, CONTROL
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | High-pressure fuel pump to cylinder head cover | N63 | M6 | Replace screws. Tighten screws in 180° increments uniformly until final tightening. Observe repair instruction. See 1351065 REMOVING AND INSTALLING/REPLACING LEFT HIGH PRESSURE PUMP (N63) or 1351070 REMOVING AND INSTALLING/REPLACING RIGHT HIGH PRESSURE PUMP (N63) |
12 Nm |