12 41 Starter and Mounting Parts
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - STARTER AND MOUNTING PARTS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Starter motor mounting to transmission bell housing | All, except N51, N52, N52K, N53, N54 | 45 Nm | ||
| 2AZ | Support to starter | All | M5 | 5 Nm | |
| 3AZ | Support to crankcase | All | 47 Nm | ||
| 4AZ | Electrical leads to starter | ||||
| All | M5 | 5 Nm | |||
| All | M6 | 7 Nm | |||
| All | M8 | 13 Nm | |||
| 5AZ | Bolt connection, pole tube | All | M6 | 6 Nm | |
| 6AZ | Heat shield to starter motor | M6 | 6 Nm | ||