12 90 Control Unit Housing
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CONTROL UNIT HOUSING
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Assembly of upper and lower sections | E32/E34/E36 | 5 Nm | ||
| 2AZ | Center section to body | E32/E34 | 3 Nm | ||
| 3AZ | Control unit holder in E box | E36 | 5 Nm | ||
| 4AZ | Control unit box cover | E38/E39/E52 | 4 Nm | ||
| E46 | 6 Nm | ||||
| E53/E36/7/E54 | 3 Nm | ||||
| 5AZ | Electronics box to firewall | E65 | Plastic screw | 6 Nm | |