11 21 Crankshaft and Bearings
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CRANKSHAFT AND BEARINGS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Increment wheel on crankshaft | S54 | M5 10.9 | Replace screws | |
| Jointing torque | 5.0 Nm | ||||
| Torque angle | 45 ° | ||||
| Increment wheel on crankshaft | M5 10.9 | Replace screws | 13 Nm | ||
| Increment wheel on crankshaft | M5 8.8 | Replace screws | 5.5 Nm | ||