11 24 Connecting Rods and Bearings

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATION - CONNECTING RODS AND BEARINGS

		Type	Thread	Tightening specification	Measure
1AZ	Connecting rod bolts	N63	M9	Replace, wash and oil screws
				1. Jointing torque	5 Nm
				2. Jointing torque	20 Nm
				3. Angle of rotation	70 °