65 52 013 Removing And Installing Complete Onboard Monitor (Widescreen)

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, 2001 BMW X5, and 2000 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Unclip frame of on-board monitor (1) in direction of arrow and remove.

Fig 1: Removing Frame Of On-Board Monitor

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen screws (1).

Fig 2: Pulling Out On-Board Monitor

Courtesy of BMW OF NORTH AMERICA, INC.

Pull out complete on-board monitor (2) in direction of arrow.

Unlock plug connections (1) and (2) and disconnect.

Fig 3: Removing On-Board Monitor

Courtesy of BMW OF NORTH AMERICA, INC.

Remove complete on-board monitor.