65 52 010 Removing and installing on-board monitor

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, 2001 BMW X5, and 2000 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Remove center fresh air grill. Refer to 64 22 161 REMOVING AND INSTALLING/REPLACING FRESH-AIR GRILL CENTER .

Detach felt strips (1) in lower area and fold upwards.

Fig 1: Detaching Felt Strips In Lower Area

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Fig 2: Detaching Rotary Knob

Courtesy of BMW OF NORTH AMERICA, INC.

Detach rotary knob (2).

Insert suitable screwdriver in aperture.

Fig 3: Unlocking On-Board Monitor

Courtesy of BMW OF NORTH AMERICA, INC.

Turn screwdriver approx. 45° in direction of arrow and unlock on-board monitor.

Withdraw on-board monitor (1) and disconnect plug connections.

Installation:

On-board monitor (1) must snap securely into place in lower lock.