65 11 055 Removing and installing / replacing radio receiver (with board monitor)

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, 2001 BMW X5, and 2000 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Loosen screws (1).

Fig 1: Removing Multifunction Tray

Courtesy of BMW OF NORTH AMERICA, INC.

Remove multifunction tray (2) towards top.

Unlock plug connections (1) and (2) and disconnect.

Fig 2: Removing Radio Receiver

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen nut (3).

Feed out radio receiver (4) in direction of arrow and remove.

Installation:

Metal tabs (1) of radio receiver (2) must be seated in mountings (3).

Fig 3: Identifying Metal Tabs Of Radio Receiver

Courtesy of BMW OF NORTH AMERICA, INC.