32 31 003 Removing and installing/replacing upper section of steering column trim

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Move steering column in "bottom" and "extended" position.

IMPORTANT:

Risk of damage!

Unclip steering column shroud (1) at side with special tool 00 9 317 .

Fig 1: Removing Steering Column Shroud Using Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Pull steering column trim (1) towards front.

Unclip steering column gap cover (1) from upper section of steering column trim (2).

Remove upper section of steering column trim (2).

Fig 2: Identifying Steering Column Gap Cover And Steering Column Trim

Courtesy of BMW OF NORTH AMERICA, INC.