LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2472 (Body - Tightening Torque) >> Support Members >> 41 35 Side Panels

41 35 Side Panels

WARNING: This page is about a different car, the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2006 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
SIDE PANELS - TIGHTENING TORQUES SPECIFICATION

  Type Thread Tightening specification Measure
1AZ Front side panel to body E63 / E64 M6 x 22 10.9   12 Nm
  E83 ST6.3x14   7 Nm
  E60 / E61 / E81 / E82 / E85 / E86 / E87 / E88 / E90 / E91 / E92 / E93 M6   7.6 Nm
2AZ Front side panel to body E63 / E64 M6 nut   5 Nm
  E60 / E61 M6 nut   7.6 Nm
3AZ Front side panel to body E60 / E61 Sheet metal screw ST4.8x19   7.6 Nm
4AZ Combination holder, side panel, front, to body E81 / E82 / E87 / E88 / E92 M6   7.6 Nm
5AZ Side panel, rear, to body E85 / E86 M6   7.6 Nm
6AZ Side panel, front, to module carrier/bumper carrier E70 / E71 M6x16   8 Nm
7AZ Front side panel to body Area, A-pillar E70 / E71 M6x16   6 Nm
8AZ Front side panel to body Area, sill E70 / E71 Sheet metal screw ST4.8x19   2.5 Nm
9AZ Front side panel to body Area, cowl panel E70 / E71 M5x20   2.5 Nm
10AZ Module carrier, top, to support carrier E70 / E71 M6x26   8 Nm
11AZ Module carrier, bottom, to engine carrier E70 / E71 M6 nut   8 Nm