41 62 Rear Lid

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATIONS - REAR LID

	Type	Thread	Measure
1AZ Rear lid to rear lid hinge	E63	M6x22	10 Nm
	E64	M8x24	18.5 Nm
	E61	ASA nut M8	20 Nm
	E61	M10 nut	38 Nm
	E60	M8x19.5 8.8	18.5 Nm
	E83/ E85/ E86	M8	20 Nm
	E81 / E87/ E70	M8	18.5 Nm
	E71	M10x25 -10.9	18.5 Nm
	E90/ E92/ E82/ E88	M8	15 Nm
	E91	M8	30 Nm
	E93	M8x25	20 Nm
2AZ Adjustment, rear lid hinge	E91	M8	20 Nm
3AZ Rear lid hinge to body	E61 / E83/ E85/ E86/ E90/ E92/ E82/ E88	M8	20 Nm
	E60/ E64/ E81 / E87	M8 nut	18.5 Nm
	E63/ E70/ E71	M8	18.5 Nm
	E91	M8 nut	20 Nm
4AZ Hinge pin	E60	M8 nut	18.5 Nm
5AZ Grounding cable strap to hinge	E87	M5 nut	4.4 Nm
6AZ Rear lid, bottom, to rear lid hinge, bottom	E70	M8x22	18.5 Nm
7AZ Rear lid hinge, bottom, to body	E70	M8x22	18.5 Nm
8AZ Setscrew to rear lid hinge	E70		18.5 Nm
9AZ Stop, rear lid to body	E70/ E71	M6x21	6Nm
	E70/ E71	M6 nut	6Nm
	E70/ E71	M12x1.5	16 Nm