41 35 Side Panels
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - SIDE PANELS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Front side panel to body | E63/ E64 | M6x22 10.9 | 12 Nm | |
| E83 | ST6.3x14 | 7 Nm | ||
| E60/ E61 / E81 / E82/ E85/ E86/ E87/ E88/ E90/ E91 / E92/ E93 | M6 | 7.6 Nm | ||
| 2AZ Front side panel to body | E63/ E64 | M6 nut | 5 Nm | |
| E60/ E61 | M6 nut | 7.6 Nm | ||
| 3AZ Front side panel to body | E60/ E61 | Sheet metal screw ST4.8x19 | 7.6 Nm | |
| 4AZ Combination holder, side panel, front, to body | E81 / E82/ E87/ E88/ E92 | M6 | 7.6 Nm | |
| 5AZ Side panel, rear, to body | E85/ E86 | M6 | 7.6 Nm | |
| 6AZ Side panel, front, to module carrier/bumper carrier | E70/ E71 | M6x16 | 8 Nm | |
| 7AZ Front side panel to body Area, A-pillar | E70/ E71 | M6x16 | 6 Nm | |
| 8AZ Front side panel to body Area, sill | E70/ E71 | Sheet metal screw ST4.8x19 | 2.5 Nm | |
| 9AZ Front side panel to body Area, cowl panel | E70/ E71 | M5x20 | 2.5 Nm | |
| 10AZ Module carrier, top, to support carrier | E70/ E71 | M6x26 | 8 Nm | |
| 11AZ Module carrier, bottom, to engine carrier | E70/ E71 | M6 nut | 8 Nm |