61 71 015 Removing And Installing/Replacing A Jet Nozzle In Windshield Washer System

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, 2001 BMW X5, and 2000 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

Unclip plug connection (1) and disconnect.

Fig 1: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Detach angle (2) or T-piece from jet nozzle.

Unlock jet nozzle (1) with a suitable screwdriver (2).

Fig 2: Removing Jet Nozzle

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out jet nozzle (1) with special tool 00 9 317 and remove.

Installation:

Ensure hose is laid without kinks.

Adjust jet nozzle.