61 62 030 Replacing Wiper Arm For Rear Window Wiper

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, 2001 BMW X5, and 2000 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

61 6 060

Lever out cap (1) at side and remove.

Fig 1: Removing Cap

G03253652

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) of cap (2) must not be damaged.

Fig 2: Identifying Catches Of Cap

G03253653

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nut (1).

Fig 3: Unscrewing Nut

G03253654

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Observe tightening torque, 61 62 2AZ. Refer to BODY EQUIPMENT - TIGHTENING TORQUES .

Detach wiper arm (1) with special tool 61 6 060 and remove.

Fig 4: Removing Wiper Arm

G03253655

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Wiper motor must be in end position.

Adjust distance (1) between wiper arm and rear window edge.

Fig 5: Adjusting Distance Between Wiper Arm And Rear Window Edge

G03253656

Courtesy of BMW OF NORTH AMERICA, INC.

32.5+/-2 mm