33 21 Output Shaft
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING SPECIFICATIONS - OUTPUT SHAFT
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Output shaft to rear differential drive flange (Torx screw with Ribbed Teeth) | E81, E87, E90, E91, E92, E93 | M8 | Replace screws | 52 Nm |
| E81, E87, E90, E91, E92, E93 | M10 | Replace screws | 80 Nm | |
| E87 | M10 ZNS | Replace screws | 80 Nm | |
| E90 / S65, E92 / S65, E93 / S65 | M12 | Replace screws | 120 Nm | |