LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2459 (Rear Axle - Tightening Torques - E92/93) >> 17 final drive mounting >> 33 17 Rear axle differential mountings

33 17 Rear axle differential mountings

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING SPECIFICATIONS - REAR AXLE DIFFERENTIAL MOUNTINGS

  Type Thread Tightening specification Measure
1AZ Rear differential (if nec. with bracket for vibration damper) to rear axle carrier E81, E87, E90, E91, E92, E93 M12 (front) Observe repair instruction. 100 Nm
  E81, E87, E90, E91, E92, E93 M14 (rear) Observe repair instruction.
Replace nut
165 Nm
2AZ Vibration damper to bolt connection, rear differential E81, E87, E90, E91, E92, E93 M12   68 Nm
3AZ Vibration damper on bracket E81, E87, E90, E91, E92, E93 M12   68 Nm