LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2458 (Wheel And Tires - Service Techniques) >> Wheel And Tires >> Kinematic Diagnosis System and environment >> 11. Updating the software/setpoint data >> 11.2 Procedure (Beissbarth)

11.2 Procedure (Beissbarth)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Go to the "Administration"  screen
  2. Select the KDS button 
  3. Select Beissbarth 
  4. Insert "Diskette 1"  on request and confirm with "OK"  (program diskette 1 of 2 is created, label it)
  5. Insert "Diskette 2"  on request and confirm with "OK"  (program diskette 2 of 2 is created, label it)
  6. Insert "Diskette 3"  on request and confirm with "OK"  (setpoint data diskette 1 of 3 is created, label it)
  7. Insert "Diskette 4"  on request and confirm with "OK"  (setpoint data diskette 2 of 3 is created, label it)
  8. Insert "Diskette 5"  on request and confirm with "OK"  (setpoint data diskette 3 of 3 is created, label it)
  9. Perform update and/or setpoint data on the KDS in the usual manner with the diskettes which have just been created.
scientia non olet · About LEMON Manuals