LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (Seats - Repair Instructions - 4.4L) >> Rear Seat, Through - Loading >> 52 26 390 Removing And Installing/Replacing Rear Head Restraints (Through-Loading System)

52 26 390 Removing And Installing/Replacing Rear Head Restraints (Through-Loading System)

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, 2001 BMW X5, and 2000 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Move head restraint up as far as possible.

Fig 1: Removing Head Restraint
G03253353Courtesy of BMW OF NORTH AMERICA, INC.

Forcefully pull out head restraint or detach by hitting firmly on one side from below.

Pull out guide rods by twisting them back and forth.

Fig 2: Pulling Out Guide Rods
G03253354Courtesy of BMW OF NORTH AMERICA, INC.
CAUTION: Do not damage rear window.

Installation: 

Notches (1) on guide rods must point in direction of catch spring (2).

Fig 3: Identifying Notches On Guide Rods
G03253355Courtesy of BMW OF NORTH AMERICA, INC.