52 17 034 Removing And Installing/Replacing Shaft For Headrest Adjustment (Comfort Seat)

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, 2001 BMW X5, and 2000 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Headrest must be moved as far forwards as possible.

Remove rear panel at top.

Remove rear panel at bottom.

Withdraw shaft in succession from gear and drive.

Fig 1: Removing Shaft For Headrest Adjustment

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Carry out function check.