11 21 Crankshaft And Bearings
WARNING: This page is about a different car, the 2010 BMW X6, 2009 BMW X6, and 2008 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
CRANKSHAFT AND BEARINGS-TIGHTENING TORQUE SPECIFICATIONS
| |
Type |
Thread |
Description |
Tightening Specification |
1AZ Torsion damper (hub) to crankshaft
(central bolt 12.9) |
N54 |
M16x80 |
Replace screws
Lightly oil screws and threads |
|
| |
|
|
Jointing torque |
100 Nm |
| |
|
|
Torque angle |
360 ° |