Version Before 09/01 Only:

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, 2001 BMW X5, and 2000 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Detach seal (1) from handle strip (2).

Fig 1: Detaching Seal From Handle Strip

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Do not damage trim (2) when removing catches (1).

Carefully lever panel (2) with special tool 00 9 322 (plastic wedge) out of handle strip (3) and remove.

Fig 2: Removing Lever Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) and guides (2) of trim (3) must not be damaged.

Fig 3: Checking Catches And Guides Of Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Remove adhesive residue (1) from handle strip (2).

Installation:

Perform function check with trunk lid open.

Fig 4: Removing Adhesive Residue From Handle Strip

Courtesy of BMW OF NORTH AMERICA, INC.