LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (Body Equipment - Repair Instructions - X5 (4.4L)) >> Front and Rear Window >> 51 31 ... Instructions on gluing windscreen >> Effect Of Differing Adhesive Quantities:

Effect Of Differing Adhesive Quantities:

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, 2001 BMW X5, and 2000 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
ADHESIVE EFFECT

Too little adhesive: Too much adhesive:
  • Windscreen rests too low in body cutout
  • Strains/tensions may occur (windscreen breakage)
  • Insufficient squeezing of adhesive bead (leaking)
  • Windscreen rests too high in body cutout
  • Wind noise may occur
  • Strains/tensions may occur (windscreen breakage)
  • Fouling of add-on parts by emerging adhesive
  • Adhesive on uninsulated strainer pressure lines of antenna(s) (interference of reception)