11 21 Crankshaft and Bearings S65
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
CRANKSHAFT AND BEARINGS S65-SPECIFICATIONS
| Ground sizes of main bearing journals | main bearing journal | |
| Original (designation Y) | mm | 59.984+0.006 |
| Original (designation G) | mm | 59.977+0.006 |
| Original (designation V) | mm | 59.971+0.005 |
| Crankshaft bearing clearance, radial | mm | |
| Max. permitted runout at centre crankshaft journal | mm | 0.15 |
|
IMPORTANT:
follow repair instructions
|
When using new parts, observe EPC (Electronic Parts Catalogue) and TIS information |
CRANKSHAFT AND BEARINGS S65-SPECIFICATIONS
| Ground sizes of main bearing journals | Guide bearing journal | |
| Original (designation Y) | mm | 59.984+0.006 |
| Original (designation G) | mm | 59.977+0.006 |
| Original (designation V) | mm | 59.971+0.005 |
| Crankshaft bearing clearance, radial | mm | |
| Max. permitted runout at centre crankshaft journal | mm | 0.15 |
|
IMPORTANT:
follow repair instructions
|
When using new parts, observe EPC (Electronic Parts Catalogue) and TIS information |