51 23 Hood/bonnet locks
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
HOOD/BONNET LOCKS-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Retaining hook to engine hood/bonnet (replace microencapsulated screws) | E81, E82, E87, E88, E90, E91, E92, E93 | 10 Nm | ||
| 2AZ | Lock to body (replace microencapsulated screws) | E70, E71, E81, E82, E87, E88, E90, E91, E92, E93 | 10 Nm | ||
| 3AZ | Upper lock section (striker) to bonnet/hood | E70, E71 | 10 Nm | ||