26 11 000 Removing and installing complete propeller shaft: Notes
WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, 2001 BMW X5, and 2000 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove exhaust system. See EXHAUST SYSTEM COMPLETE
- Remove heat shield at rear.
Unfasten screws.
Tightening torque, see 26 11 1AZ in PROPELLER SHAFT - TIGHTENING TORQUES - X5