11 21 Crankshaft and Bearings
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
CRANKSHAFT AND BEARINGS-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Increment wheel on crankshaft | S54 | M5 10.9 | Replace screws | |
| Jointing torque | 5.0 Nm | ||||
| Torque angle | 45 ° | ||||
| Increment wheel on crankshaft | M5 10.9 | Replace screws | 13 Nm | ||
| Increment wheel on crankshaft | M5 8.8 | Replace screws | 5.5 Nm | ||