11 24 Connecting Rods and Bearings
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
CONNECTING RODS AND BEARINGS-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Connecting rod bolts | S65 | M9x1 | Replace screws Screws washed and oiled |
|
| 1. Jointing torque | 6 Nm | ||||
| 2. Setting torque | 20 Nm | ||||
| 3. Angle of rotation | 130 ° | ||||
| Important 4. Release connecting rod bolts. | |||||
| 5. Jointing torque | 6 Nm | ||||
| 6. Setting torque | 20 Nm | ||||
| 7. Angle of rotation | 130 ° | ||||
| Important 8. Release connecting rod bolts. | |||||
| 9. Jointing torque | 6 Nm | ||||
| 10. Setting torque | 20 Nm | ||||
| 11. Angle of rotation | 130 ° | ||||