13 62 560 Removing and installing/replacing mass air flow sensor (M60, M62, M73): Notes
WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, 2001 BMW X5, and 2000 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Interrogate fault memory of DME control unit.
Switch off ignition.
Disconnect plug connection (1) from air-mass flow sensor.
Release hose clip (2).
Detach intake hose from air-mass flow sensor.
Open clips (1).
Detach air-mass flow sensor from air cleaner upper section.