33 5 040 Open-end wrench WAF 50 mm with locking clip
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Minimum set: Mechanical tools
In conjunction with: 33 5 070
NOTE:
For releasing and tightening down insert nut for bolt connection of propeller shaft to rear differential.
Series: E70, E88, E90, E91, E92, F01, F02
Storage location: A18
SI number: 01 21 06 (300)
Order number: 33 5 040
Open-end wrench WAF 50 mm with locking clip
Consisting of:
1 = 33 5 041 Basic body
2 = 33 5 042 Clip
3 = 33 5 043 Pin with chain (2 x)