33 4 460 Set of tools

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

In conjunction with: 33 4 450

NOTE: For removing and installing camber arm rubber mount on rear axle carrier.

Series: E60, E61, E63, E64, E65, E66, E67, E70, E71, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, RR1, RR2

Storage location: B49, C49

SI number: 1 15 04 (117)

Order number: 33 4 460

Set of tools

Fig 1: Special Tool (33 4 460)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 33 4 461 Draw-in disk

2 = 33 4 462 Pull-out disk

3 = 33 4 463 Counter support

4 = 33 4 464 Support sleeve

5 = 33 4 465 Spindle 205 mm, M12

6 = 33 4 466 Pressure nut