33 4 430 Set of tools

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

NOTE: For removing and installing front rubber mounts on rear axle carrier.

Series: E81, E82, E87, E88, E90, E91, E92, E93

Storage location: B49, C49

SI number: 1 15 04 (117)

Order number: 33 4 430

Set of tools

Fig 1: Special Tool (33 4 430)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 33 4 431 Pull-out disk

2 = 33 4 432 Counter support

3 = 33 4 433 Draw-in disk

4 = 33 4 434 Spindle 225 mm, M16

5 = 33 4 435 Pressure nut

6 = 33 4 436 Spindle 320 mm, M18

7 = 33 4 437 Pressure nut