33 3 260 Set of tools

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

NOTE: For removing and installing rear wheel bearings in wheel carrier and for fitting drive flange

Series: E31, E34, E38, E46/16, E52, E53, E60, E61, E67, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, RR1

Storage location: B7, B8

SI number: 01 05 90 (207)

Order number: 33 3 260

Set of tools

Fig 1: Special Tool (33 3 260)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

2 = 33 3 262 Spacer sleeve

NOTE: For removing wheel bearing from wheel carrier and for installing drive flange Model series: E31, E34, E38, E46/16, E52, E53, E83

3 = 33 3 263 Adapter sleeve

NOTE: For removing wheel bearing from wheel carrier - Model series: E31, RR1

4 = 33 3 264 Adapter sleeve

NOTE: For installing wheel bearing in wheel carrier Model series: E31, E34, E38, E46/16, E52, E53, E83, RR1

5 = 33 3 265 Thrust washer

NOTE: For installing wheel bearing in wheel carrier - Model series: E31

6 = 33 3 266 Adapter sleeve

NOTE: For installing drive flange and removing wheel bearing Model series: E38, E52, E53, E60, E61, E83, RR1

7 = 33 3 267 Thrust washer

NOTE: For installing drive flange Model series: E31, E34, E38, E46/16, E52, E53

8 = 33 3 268 Support disk

NOTE: For installing wheel bearing Model series: E38, E52, E53, E60, E61, E83, RR1