33 1 300 Rillex tapered roller bearing extractor

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For bevel pinion and differential case (rear diff)/for mounting sprocket wheel on crankshaft (M70)/for removing bearing inner race from drive flange (E36, E46)

Transmission: Rear diff. type G, rear diff. type K, rear diff. type M, S5D 260Z, S5D 310Z, S5D 320Z

Storage location: B6, C6

Order number: 33 1 300

Rillex tapered roller bearing extractor

Fig 1: Special Tool (33 1 300)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 33 1 301 Adapter with spindle

NOTE: For transmissions S5D 260Z, S5D 310Z and S5D 320Z

1 = 33 1 311 Gripping piece

2 = 33 1 312 Thrust member

NOTE: For detaching bearing inner race from drive flange - model series: E36/5

In conjunction with: 00 7 500

5 = 33 1 305 Thrust member (old)

6 = 33 1 306 Thrust member

7 = 33 1 307 Thrust member

8 = 33 1 308 Thrust member

9 = 33 1 309 Thrust member

NOTE: For rear differential and for mounting sprocket wheel on crankshaft (M70)

In conjunction with: 00 8 500