31 3 350 Spring holder
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Minimum set: Mechanical tools
In conjunction with: 31 3 340 and 31 3 360
NOTE:
For locating coil springs during tensioning. No. 31 3 350 reserved for consecutive sub-number spring tensioner 31 3 340.
Series: E31, E36, E36/7, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E71, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, F01, F02, R50, R52, R53, R55, R56
Storage location: Single
SI number: 1 11 99 (438)
Order number: 31 3 350
Spring holder
Consisting of:
1 = 31 3 351 Spring holder (2 x)
NOTE:
To be used with repair instructions only
2 = 31 3 352 Spring holder (2 x)
NOTE:
To be used with repair instructions only
3 = 31 3 353 Spring holder (2 x)
NOTE:
To be used with repair instructions only
4 = 31 3 354 Spring holder ring
NOTE:
To be used with repair instructions only
5 = 31 3 355 Spring holder
NOTE:
To be used with repair instructions only
6 = 31 3 356 Centering ring
NOTE:
To be used with repair instructions only
7 = 31 3 357 Spring holder (2 x)
NOTE:
To be used with repair instructions only
In conjunction with: 31 3 340
8 = 31 3 358 Insertion ring
NOTE:
To be used with repair instructions only. For insertion in spring retainer ring 31 3 354. Model series: E87
9 = 31 3 381 Spring retaining ring
NOTE:
To be used with repair instructions only.
10 = 31 3 382 Spring retainer
NOTE:
To be used with repair instructions only.
11 = 31 3 383 Spring retainer
NOTE:
To be used with repair instructions only.