11 28 010 Replacing alternator drive belt (M62): Notes

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, 2001 BMW X5, and 2000 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If the drive belt is to be subsequently reused:
Mark direction of travel and reinstall drive belt in same direction of travel.

Remove fan clutch with impeller, refer to 11 52 020 REMOVING AND INSTALLING OR REPLACING FAN COUPLING (M62) .

Layout of drive belt.

Fig 1: Layout Of Drive Belts

Courtesy of BMW OF NORTH AMERICA, INC.

Slacken screws (1) and relieve tension on belt drive.

NOTE: Release screws (1 and 2) to remove complete belt tensioner.

Remove drive belt.

CAUTION: You must replace the drive belt if it is contaminated with hydraulic fluid.

Fig 2: Identifying Complete Belt Tensioner Removing Screws

Courtesy of BMW OF NORTH AMERICA, INC.