11 21 500 Replacing crankshaft (M62): Installation

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, 2001 BMW X5, and 2000 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Shrink-fit sprocket wheel to crankshaft.

Check wedge for correct position.

Heat sprocket wheel with a hot-air blower or on a heating plate to max. 150° C.

CAUTION: Do not exceed specified temperature!

Replace main crankshaft bearing shells,

refer to 11 21 531 REPLACING MAIN CRANKSHAFT BEARING SHELL (M62) .

Replace conrod bearing shells,

refer to 11 24 571 REPLACING ALL CONROD BEARINGS (M62) .

Replace deep-groove ball bearings in crankshaft,

refer to 11 21 571 REPLACING GROOVED BALL BEARING IN CRANKSHAFT (M62 / S62) .