23 1 440 Holding sleeve

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For fitting bearing bush and inner bearing race on output shaft as well as for removing bearing on output shaft (S5D 310Z)

Transmission: 265/5, 265/5Sport, 280/5Sport, S5D 310Z

Storage location: C22, C23

Order number: 23 1 440

Holding sleeve

Fig 1: Special Tool (23 1 440)