11 9 260 Counter support with screw connection

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

NOTE: For locking flywheel with transmission removed

Engine: M47TU, M54, M57T2, M57TU, N40, N42, N43, N45, N45T, N46, N46T, N47, N47S, N51, N52, N53, N54, N62, N63, N73, S65, S85, W17

Fig 1: Special Tool (11 9 260)

Courtesy of BMW OF NORTH AMERICA, INC.

Storage location: B43

SI number: 1 01 01 (662)

Order number: 11 9 260

Counter support with screw connection

Consisting of:

1 = 11 9 261 Counterholder, individual

2 = 11 9 262 Bolt (M10 thread) with washer

NOTE: For bolting down counterholder

3 = 11 9 263 Sleeve for counterholder

NOTE: For counterholder for locking flywheel with transmission removed engine: N62, N73

4 = 11 9 264 Bolt (M12 thread)

NOTE: For counterholder for locking flywheel with transmission removed

5 = 11 9 265 Sleeve

6 = 11 9 266 Sleeve

NOTE: For counterholder for locking flywheel with transmission removed Engine: M57TU2