65 20 035 Removing and installing/replacing roof-mounted aerial

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Detach empty housing for roof-mounted aerial, see 65 20 030 Removing and installing/replacing empty housing for roof-mounted aerial .

Release screw (1) and feed out roof aerial (2) towards top.

Fig 1: Identifying Feed Out Roof Aerial And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (1) and remove aerial (2).

Fig 2: Identifying Plug Connections And Aerial

Courtesy of BMW OF NORTH AMERICA, INC.

After installation:

Stick on empty housing for roof-mounted aerial, see 65 20 030 Removing and installing/replacing empty housing for roof-mounted aerial .