52 14 010 Removing and installing/replacing both seat rails on left or right front seat (normal/electric)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove front seat , see 52 14 000 Removing and installing left or right front seat .
- Remove lower strap (belt tensioner), see 72 11 041 REMOVING AND INSTALLING/REPLACING FRONT LEFT OR RIGHT LOWER BELT FITTING (SEAT BELT TENSIONER) .
- Remove drive unit for longitudinal seat adjustment, see 67 31 500 REMOVING AND INSTALLING/REPLACING DRIVE UNIT FOR LONGITUDINAL SEAT ADJUSTMENT .
WARNING:
Read and comply with safety regulations
for handling airbag modules and pyrotechnical belt tensioners, see 72 00... SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS
.
Improper handling can lead to triggering of the pyrotechnical seat belt pretensioner or side airbag, resulting in injuries.
Improper handling can lead to triggering of the pyrotechnical seat belt pretensioner or side airbag, resulting in injuries.
Switch off ignition!
Unlock all plug connections and disconnect.
Press catches (1).
Slide adjusting unit (2) for active head restraint adjustment in direction of arrow and remove.
Release left and right screws (1).
Tightening torque 52 10 6AZ , see 52 10 FRONT SEATS .
Remove seat rails (4) with carrier plate (3).
Release fastening elements (2) on left and right.
Remove carrier plate (3).
Release screws (1).
Remove holder (2) for lower strap (belt tensioner).