51 22 300 Removing and installing/replacing window cavity cover strip on rear door on left or right
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 317
- 00 9 324 MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS
IMPORTANT:
Observe procedure
for using special tool 00 9 324
, see 51 21... Removing window cavity cover strip with special tool 00 9 324 at front or rear .
IMPORTANT:
If reusing the existing window cavity cover strip (1), make sure it is not bent.
Lever out window cavity cover strip (1) with special tool 00 9 324 (starting at B-pillar).
At same time raise window cavity cover strip (1) with special tool 00 9 317 in area of B-pillar.